top of page



Flooring and Matting Accessories




EverBlock’s Transition Edging pieces provide a smooth transition between the sub-floor and the surface of the EverBlock and are compatible with EBF1, EBF2, and EBFD flooring. Transition Edging is also available for the EBF3 industrial floor module.

Use EverBlock Edging for tent floors, dance floors, exhibit floors, entryways, or wherever you need to provide a safe and gradual transition.

There are 3 transition pieces that are used with EverBlock, one to connect to the male connector sides, one to connect to the female connector sides, and a corner piece.

Use EverBlock Edging on all sides of your floor or just in areas where people walk up onto the floor, such as entryways or at the front or sides of an exhibit booth.

Ramps provide a smooth transition from the ground surface onto the flooring and meet ADA guidelines for accessibility.


Transport Carts

everblock+flooring+transport+cart (1).jp

Utilize the EverBlock Transport Cart to move your flooring between venues or from storage to an installation site.

The EverBlock Cart features rubber, large diameter, caster wheels that enable you to easily move heavy loads, single-handedly, without damaging the floor surface below.

A detachable push handle facilitates storage and easy transport of your carts and is used to push carts without pressing on the stack of flooring.

Transport roughly 1000 sq/ft of Dance Floor and 800 sq/ft of tent flooring on a standard EverBlock cart, depending on facility height restrictions or doorway limitations.

Each cart features steel construction with 5" caster wheels for added durability.  The deck of the cart is manufactured of a durable plywood with a 1/2" steel lip around the perimeter. 

Carts ship with the 29" handle removed for more compact shipping. 

Width: 38"    Length: 38"  

Weight Capacity: 600 lbs. Can transport 345 sq/ft of flooring (38 sheets) at normal loading.

Connector Lugs


EverBase 1 DT (Drainage Top version), EverBase 2 DT, and EverBase 3 DT can be retrofitted with square Connector Lugs, designed to be snapped into the floor and then interlock with EverBlock modular building blocks that are placed on top of the floor. 


The 2" square Connector Lugs pressure fit into the drainage holes on the DT version, creating a lug base tile for supporting EverBlock constructions. The EverBlock Connector Lugs prevent sliding 

or horizontal movement of EverBlock building blocks on the floor and provide extra support and rigidity to constructions by essentially connecting the construction to the floor below.

Connector Lugs are only required to be snapped into the area of the floor upon which blocks will be placed, allowing the balance of the floor tile to remain smooth for regular use.

Connector Lugs may be removed after use, allowing you to use the floor for other uses when blocks are not going to be placed on top.


Connector lugs plug into drainage holes on the DT versions of EverBlock Flooring

Modular Building Blocks


Use EverBlock Building Blocks, placed on top of EverBlock Flooring,  to create walls, dividers, furniture, décor, and structures.

Place EverBlock Building Blocks underneath EBF1, EBF2, and EBFD flooring modules to elevate floors, and to build varying level floors for a multitude of uses.

Imagine an elevated DJ booth, seating risers in an auditorium,  or a multi-level trade show exhibit, complete with walls and integrated furniture.

Visit our Modular Building Block Website:


Connector Links

Use EverBlock Connector Links to connect EverRoad® mats to each other and to form a continuous roadway or work pad.

EverBlock Connector Links are manufactured in steel and can support tremendous stresses and weight, including from moving heavy equipment and vehicles. 

Links are designed to tip and lock into place and are specially shaped to fit into pre-drilled connector holes on the four corners of each mat. 

While links are not necessary for mat use, they are recommended for longer term installations or in situations where a unified area or more solid roadway is required.

We offer two types of connector links - a 2-way link and a 4-way link. Use our 4-way link to connect 4 mats together at the intersecting corner and use the 2-way link to connect two mats together at the adjacent corners. 

bottom of page